40w LED Linear Light outdoor lighting project construction -616A+B

1035 People watching this product now!

616A+B
SMD LINEAR LAMP
Lamp power:40W/60W180W
Working voltage :AC85-265V 50/60HzShine angle :24
24
Color temperature:3000K/4000K/6000K
Color:BK
Ambient temperature :-20℃~+40’CLamp material :AL
Protection grade : IP20
Service life :>50000H
Long:1.1m1.65m2.2m
In stall ation:suck the top/messeng wire

Sold by

SKU: nicewaylighting-136

Nice Way Lighting

1. LED Linear Light two ends of the wiring wayside out of the line.

Choose an exit hole of the same wire diameter from the aluminum side of both ends of the ED line light body. Waterproof pair of wiring from this hole connected to the circuit board from the aluminum side threading.

The advantage of the installation is a seamless connection, a lighting effect without dark areas, and very ease of installation. But this installation is not very convenient for the hidden power and signal lines, and the line can only be exposed outside. Small building floors will be close to see the lines, for the whole building is not so beautiful.

2. LED Linear Light two ends of the wiring way of plugging out of the line.

The plug outline is from the LED Linear Lights at both ends of the plug piece in the middle to open a line out of the hole. The installation of the plug-out line led outdoor waterproof line light differs from the bottom hidden line and sideline. In docking installation, there is about a 1CM gap between the light and the light. In the practical application of lighting projects, gap 1CM spacing will not impact the overall lighting effect much because the light beam is a scattered part and can fill the lack of light by itself. The plug-out line can not be seamlessly connected, and aesthetics are slightly lower than the bottom line. Used in various buildings with dark channels and glass curtain walls, easy to install.

3. LED Linear Light two ends of the wiring way of the bottom of the line.

The bottom wire is a gap from the ends of the aluminum profile, and the wire with a tail card will be shrunk to the aluminum gap and with screws on the plug piece. Bottom outlet LED In addition to the seamless connection, the line light can hide the docking wire and power cord at the bottom because the bottom of the line light housing is an H appearance. The following is more convenient to hide the wires, and the installation of the bottom outlet is more beautiful to the building. Most outdoor lighting projects choose the hidden bottom wire out of the way.