Pure sine wave Inverter with solar charger controller MPPT- PV 6048

SPECIFICATION : 
MPPT Solar Controller Function
Rated Voltage 24/48V DC
Rated Charge Current 40/60A
Load Current 15A
Input Voltage Range 15-55V DC
Max. PV open circuit array voltage 55V DC
Typical Idle Consumption At idle5s; 1.5*Inom>20s; 1.25*Inom temperature controlled
Bulk charge 29.2V(default)
Floating charge 53.6V(default)
Equalization charge 56.0V(default)
Over charge disconnection 59.2V
Over charge recovery 54.4V
Over charge disconnection 43.2V(default)
Temperature compensation -52.8mV/C
Load acid battery setting Adjustable
NiCad battery setting Adjustable
Load Control Mode 1.Low Voltage Reconnect(LVR):Adjustable; 2.Low Voltage Disconnect(LVD):Automatic disconnection; 3.Reconnection:Includes warning flash before disconnect and reconnection
Low voltage reconnect 48.0-56.0Vdc
Low voltage disconnect 42.0-50.0Vdc
Ambient temperature 0to 40?C(full load) 40-60?C(de-rating)
Altitude Operating5000m, Non-Operating 16000m
Protection class IP21
Battery temperature sensor BTS optional remote battery temperature sensor for increased charging precision
Terminal size (fine/single wire) #8 AWG
PV Inverter Battery Priority
Input voltage wave form Sinusoldar (Utility or Generator)
Nominal input voltage 230 Vac
Low line disconnect 155Vdc?4%
High line disconnect 285Dvc?4%
Max Ac input voltage 270Vrms
Nominal Input Frequency 50Hz/60Hz (Auto Detection)
Over load protection Circuit Breaker
Output Shor Circuit Protection Circuit Breaker
Efficiency Line Mode >95%
Transfer swath rating 30A
Transfer time (AC to DC) 20ma (Typical)
Output voltage Waveform Pure Sine Wave
Rated Output Power (W) 6000W
Power Factor 1
Nominal Output Voltage 230Vac
Output Voltage Regulation ?10%rms
Nominal Efficiency >80%
By Pass Optional
AC Charger Optional
Charge Current Regulation ?5%
Battery Intial  Voltage 0-15.7Vdc / 31.4Vdc (can operate with 0V battery)
Communication Rj11 (Used for Factory Testing, No Customer Interface Available)
Safety Certification CE (EN80950)
EMI Classification EN50091-2 class A
Operating Temperature range 0?C to 40?C
Storage Temperature -B5315?C-60?C
Operation Humidity 5% to 96%
Audible Noise 60dB Max.
Cooling Forced Air Variable Speed Fan