-1%
D, DG Horizontal multistage centrifugal water pump
Original price was: 28,000.00 AED.27,800.00 AEDCurrent price is: 27,800.00 AED.
670
People watching this product now!
High Pressre Multistage Boiler Feed Water Pump
Product Introduction:
D, DG pump is the horizontal multistage centrifugal pump. Has the efficiency to be high, the performance range is broad, the movement safe steady, the noise is low, the life is long, characteristics and so on installment service /convenience. Are similar for the transportation clear water or the physico-chemical properties to water other liquid. May also through the change pump overflow part material quality, the seal form and increases the cooling system to use in transporting the hot water, the oil class or corrosiveness or contains the abrasive medium. The product carries out JB/T1051-93 “Multistage Clear water Centrifugal pump Pattern .And .Basic .parameter .the .standard
Range of Application:
Suitable for boiler water supply and drainage in municipal projects and factories and mines and industrial cyclic pressurization and distant water transportation, pressurization in high-rising ,fire control in constructions, and so on.
Type Designation:
D/DG 46 – 50×12
D :Segmental feed pump.
G :Boiler pump
46 : Designed flow (m3/h)
50 :Single stage lift head (m)
12 : Stage number
Technology Parameters:
Flow:3.75-500m3/h
Head:19-650m
Power:2.2-1050KW.
Rotary speed:1450 or 2950r/min
Calibre:40-250mm
Temperature range:≤105°C
Sold by
D, DG multistage centrifugal pump
D,DG multistage centrifugal pump is horizontal multi – stage centrifugal pump. D,DG multistage centrifugal pump is suitable for the delivery of clean water (with impurity mass less than 1%.Particle size less than 0.1 mm) and other liquids with physical and chemical properties similar to clean water.
D multistage centrifugal pump is used for the medium with temperature less than 80degree Celsius and suitable for mine drainage, oilfield water injection, factory and urban water supply, drainage and other occasions. Oil field injection pump uses different materials according to the corrosive medium. DG multistage centrifugal pump is used for medium with temperature less than 105 degree Celsius and suitable for all kinds of boiler feed water.
Structure description:
D, DG type pump is mainly composed of stator, rotor, bearing and shaft seal four major parts:
The stator part is mainly composed of the suction section, the middle section, the discharge section and the guide vane, etc. The tension bolts clamp each section and constitute the work room. D type pump is generally for horizontal suction, vertical upward discharge; Used for oil field water injection, pump inlet and outlet are vertical upward. DG type pump and inlet are vertical upward.
The rotor part is mainly composed of shaft, impeller, balance disk and shaft sleeve. The axial force is balanced by the balance plate.
The bearing is mainly composed of the bearing body, the bearing and the bearing gland. The bearing is lubricated with grease or thin oil.
The shaft seal adopts soft packing seal, which is mainly composed of seal body, packing and water retaining ring on the inlet section and tail cover. Type D pump water seal water from the pump pressure water. DG pump water seal comes from external water supply.
The drive pump is driven directly by the prime mover through an elastic coupling. From the prime mover end to see the pump, pump clockwise rotation
Model and significance
D (DG) 155-67*9
D– multi-stage centrifugal pump
(DG)– multi-stage boiler feed water pump
155– flow (m3/h)
67—head for single stage (m)
9 – stage
Vendor Information
- Store Name: kenshinepump
- Vendor: kenshinepump
-
Address:
China 215600
Jiangsu / 江苏, shanghai,china, , Room 216-108, Textile resources market,Shanghai,China. - No ratings found yet!
Reviews
There are no reviews yet.